The selection of insulation thickness of ceramic fiber modules needs to consider the following factors:

1. Equipment operating temperature: Determine the thickness of the insulation layer according to the equipment operating temperature. In general, the higher the operating temperature of the equipment, the greater the thickness of the insulation layer should be.

2. Thermal conductivity: The thermal conductivity of ceramic fiber modules is low, so the heat conduction can be reduced by increasing the thickness of the insulation layer to improve the insulation effect.

3. Energy saving requirements: Determine the thickness of the insulation layer according to the energy saving requirements. According to energy-saving standards and requirements, determine the appropriate insulation thickness to reduce energy consumption.

4. Heating surface area: Determine the thickness of the insulation layer according to the heating surface area, and the equipment with a large surface area usually needs a thicker insulation layer to ensure a good insulation effect.

It should be noted that the thickness of the insulation layer should not be too thin, otherwise it will lead to heat loss; It can not be too thick, otherwise it will increase the difficulty and cost of construction.

According to the above factors, the appropriate insulation thickness of ceramic fiber module can be determined.

At the same time, it is suggested to carry out specific calculation and determination according to specific engineering requirements and design specifications.